HPI Savage 21 Front Coil Spring 1.6mm Wire for 115mm Damper SAV13170/SP by GPM [SAV13170/SP]

HPI Savage 21 1.6mm Coil Spring F/115mm Long Damper - 1pr - GPM SAV13170/SP

Price:

£1.93

Brand:

GPM

Model:

SAV13170/SP

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the

Spares / Hop-ups - HPI Racing - SAVAGE

Front spring for Savage 21

Manufactured for HPI Savage 21 setup use, this front coil spring uses a 1.6mm wire diameter and is compatible with 115mm long dampers. It is supplied as the listed item and intended for shock replacement or as a spring option when tuning Savage 21 front suspension.

Installation follows standard shock servicing steps: remove the shock from the model, take off the shock cap and shaft, withdraw the previous spring, slide the new spring onto the shock body or perch, then reassemble and confirm travel and preload. After fitting, adjust ride height and damping to tune the vehicle behaviour.

The spring's 1.6mm wire size and fit for 115mm dampers deliver a definable spring rate that helps when refining front-end support and handling balance on HPI Savage 21 vehicles.

Will this spring work with aftermarket Savage 21 shocks?

It will fit any front shock with a 115mm length and a compatible spring perch; confirm perch diameter and seat style before fitting to ensure proper fitment.

Should I change oil when installing these springs?

You do not have to change shock oil to swap springs, but it is a good opportunity to inspect seals and fluid condition and service the shocks if needed.