HUDY 293405 Aluminium Clamp Servo Horn for Hitec 24T  [HSP-293405]

HUDY 293405 - Aluminium Clamp Servo Horn - Hitec - 2-HOLE - 24T
Price:
£19.28
Brand:
HUDY
Model:
HSP-293405
Condition:
Brand New
Write a review
alt="HUDY 293405 - Aluminium Clamp Servo Horn - Hitec - 2-HOLE - 24T" title="HUDY 293405 - Aluminium Clamp Servo Horn - Hitec - 2-HOLE - 24T"
alt="HUDY 293405 - Aluminium Clamp Servo Horn - Hitec - 2-HOLE - 24T" title="HUDY 293405 - Aluminium Clamp Servo Horn - Hitec - 2-HOLE - 24T"

Solid Steering Interface with HUDY 293405

The HUDY 293405 Aluminium Clamp Servo Horn is made for hobbyists who expect consistent steering feel. Precision CNC-machining and a clamp mount make it ideal for Hitec servos using a 24T spline.

Firm Aluminium Construction for Reliability

Compared with moulded parts, the aluminium horn resists distortion and maintains alignment under steering loads. The clamp attachment secures the horn to the servo output for dependable control.

Simple Two-Hole Setup for Tuning

The pair of mounting holes gives quick options for changing linkage geometry, allowing you to fine tune steering ratio and response without major changes to the servo or rods.

Part Number and Spline Marked

Laser engraving identifies the part and spline specification at a glance, making maintenance and part selection faster when you are prepping or repairing a model.

Specifications

  • Material: CNC-machined Aluminum
  • Compatibility: Hitec Servos with 24T Spline
  • Mounting Holes: 2
  • Linkage Hardware: 3mm Drilled and Tapped
Remark :
Due to limited stock availability, please notice that some HUDY items may have to order from the factory and the ready time is around 8-12 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

What vehicles benefit most from this horn?

Any model that puts higher loads on the steering, such as touring cars or 1/10 scale buggies, will benefit from a stiffer aluminium horn when the servo uses a 24T spline.

Can I paint or anodise the horn?

Surface finishing can be applied, but be careful to avoid obscuring the laser engraved identification and ensure any coating does not interfere with clamp fit and screw threads.

How do I check spline compatibility?

Confirm the servo has a 24-tooth spline and that the horn seats flush on the servo output. If the spline counts match and the horn clamps securely, it should be compatible.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved