HUDY 296542-B Titanium M4 Wheel Nuts, Serrated Flange, Blue  [HSP-296542-B]

HUDY 296542-B - Titanium NUT M4 With Serrated Flange - Blue (4)
Price:
£19.30
Brand:
HUDY
Model:
HSP-296542-B
Condition:
Brand New
Write a review
alt="HUDY 296542-B - Titanium NUT M4 With Serrated Flange - Blue (4)" title="HUDY 296542-B - Titanium NUT M4 With Serrated Flange - Blue (4)"

M4 Titanium Nuts for R/C Wheels

The HUDY 296542-B titanium M4 wheel nuts are compact, precision fasteners intended for secure wheel mounting and chassis tuning where low weight and reliable thread engagement matter. The serrated flange helps lock the nut to the wheel face, limiting rotation under vibration while titanium keeps mass down relative to steel.

To install, hand-start the nut on the M4 stud, then use the correct hex driver to seat it against the wheel. Confirm even contact between the serrated flange and the wheel face, and verify hub seating before final torque. Recheck after running to ensure seating remains consistent.

These nuts are a useful detail for maintaining repeatable tightening and minimising rotating mass. They frequently reduce the need for additional washers or heavy thread locker in typical setups.

Specifications

  • Item: Titanium M4 wheel nuts, serrated flange, blue finish
  • Material: Titanium
  • Model Number: HUDY 296542-B
  • Compatibility: R/C cars with M4 wheel studs

These HUDY titanium M4 nuts work well for modelers seeking lightweight, secure wheel fastening with built-in anti-rotation from the serrated flange, supplied as a 4 pcs blue set.
Remark :
Due to limited stock availability, please notice that some HUDY items may have to order from the factory and the ready time is around 8-12 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will these fit all standard M4 wheel studs?

They are made for standard M4 wheel studs, but confirm stud length and head clearance on your hubs before final fitment to ensure correct seating.

What does the blue finish mean for wear?

The nuts are supplied with a blue finish. Depending on use and contact with the wheel face, surface wear may appear over time; periodic checks will show any changes.

How should I check the seating after fitting?

Visually inspect that the serrated flange sits evenly on the wheel face, confirm there is no play, and run a short test before re-torquing to final setting.

Are titanium nuts compatible with steel studs?

Yes, titanium nuts thread onto steel M4 studs used in many R/C cars. As with any mixed-metal fitment, inspect for unusual wear and verify secure seating during initial runs.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved