HUDY 992445 Titanium Adjustable Turnbuckle Set 45mm M4 L/R (2 pcs)  [HSP-992445]

HUDY 992445 - Titanium Adjustable Turnbuckle 45mm M4 L/R (2)
Price:
£14.72
Brand:
HUDY
Model:
HSP-992445
Condition:
Brand New
Write a review

Premium titanium tie-rod components for model tuning

This HUDY turnbuckle pair is crafted from titanium for use in R/C turnbuckle and tie-rod linkages, providing a left-thread and a right-thread adjustable unit. They are intended for setup and maintenance where precise incremental changes and corrosion resistance are valued.

Fitting procedure: remove the old turnbuckles, confirm the M4 thread and handedness match, then thread these in by hand before final tightening with the proper hex key. Use the original locking approach used on your model and check engagement to avoid cross-threading. Apply thread-lock only if recommended for your platform.

Setup impact: adjustable turnbuckles let you tweak toe, steering geometry, and steering feel in small steps. Titanium reduces mass compared with heavier materials and offers good corrosion and fatigue characteristics; always verify compatibility with your existing ball cups and rod ends first.

Specifications

  • Item: Titanium adjustable turnbuckle 45mm M4 L/R (2 pcs)
  • Material: Titanium
  • Model Number: HUDY 992445
  • Compatibility: For use in R/C turnbuckle/tie-rod linkages where M4 thread and 45mm length are appropriate

Ideal when you need compact, corrosion-resistant parts for accurate linkage setup; confirm thread pitch and rod-end fitment before putting them into service.
Remark :
Due to limited stock availability, please notice that some HUDY items may have to order from the factory and the ready time is around 8-12 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

What thread pitch and length are these specified for?

They are specified as M4 threads with a nominal length of 45mm; confirm these dimensions against your model's requirements before purchase.

How can I confirm compatibility with my ball studs?

Measure the inner diameter and thread compatibility of your ball cups and rod ends; if they accept M4-threaded turnbuckles and the 45mm length fits your geometry, they should be compatible.

Are there recommended torque limits when fastening?

Avoid over-tightening; hand-tighten then use appropriate small drivers to achieve secure engagement. Excessive torque can damage threads regardless of material.

Can these be used on both front and rear linkages?

Yes, provided the M4 thread and 45mm length suit the linkage layout at both ends; check that clearance and ball stud geometry work for the specific application.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved