HUDY 992450 Precision Adjustable Turnbuckle Set 50mm M4 L/R  [HSP-992450]

HUDY 992450 - Titanium Adjustable Turnbuckle 50mm M4 L/R (2)
Price:
£14.72
Brand:
HUDY
Model:
HSP-992450
Condition:
Brand New
Write a review

Precision link for accurate R/C geometry adjustments

This HUDY 992450 turnbuckle is an R/C scale tie-rod component machined from titanium, intended for precise steering and suspension adjustments on electric and nitro R/C cars. The pair includes one left-hand and one right-hand M4 threaded rod at 50mm length, allowing symmetric end-to-end adjustment without adding fixtures or adapters.

Use this part where adjustable rod ends are needed to fine-tune toe, camber link length, or steering geometry. The titanium material offers a balance of strength and reduced weight compared with steel, while the left/right threading simplifies setup: turning the central body alters overall length without rotating chassis-mounted rod ends.

During installation confirm full thread engagement at both ends and avoid overtightening against plastic rod ends or composite housings. When measuring setup changes, adjust one side at a time and recheck alignment to keep steering geometry consistent. This product is an R/C accessory only and is not intended for any full-size vehicle use.

Specifications

  • Item: Adjustable turnbuckle, 2 pcs
  • Material: Titanium
  • Model Number: 992450
  • Size: 50mm
  • Thread: M4 left and right
  • Quantity: 2 pcs (1 L, 1 R)
  • Compatibility: R/C tie-rod and turnbuckle applications

A practical, lightweight link for precise steering and suspension setup work, offering corrosion resistance and simple length adjustment for hobby and competition models.
Remark :
Due to limited stock availability, please notice that some HUDY items may have to order from the factory and the ready time is around 8-12 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will these fit standard M4 rod ends and link hardware?

Yes. The turnbuckles use M4 threads and are compatible with standard M4 rod ends; confirm the match and thread direction before final installation.

How do I verify compatibility with my car's steering geometry?

Measure existing link length and thread type, then compare to the 50mm M4 specification. Ensure mounting points provide adequate clearance for the turnbuckle body during full suspension travel.

Can I mix these with steel rod ends on the same link?

Yes, but check for galvanic concerns in harsh environments and confirm the mechanical fit. Use compatible thread materials and inspect periodically for wear.

Any clearance issues to watch for when fitting 50mm turnbuckles?

Verify there is room for the turnbuckle body to rotate and for rod ends to articulate throughout suspension travel to avoid binding or contact with nearby components.

Is the 992450 set suitable for both electric and nitro R/C models?

Yes. The design is intended for general R/C tie-rod and turnbuckle use across electric and nitro cars; always confirm fit and clearance on your specific chassis.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved