HUDY 992455 Titanium Adjustable Turnbuckle M4 55mm L/R (2 pcs)  [HSP-992455]

Price:
£14.87
Brand:
HUDY
Model:
HSP-992455
Condition:
Brand New
Write a review

Compact 55mm titanium link

The HUDY 992455 turnbuckle is an adjustable steering and tie-rod link designed for R/C cars that use M4 connections. With titanium construction and a 55mm nominal body length, the left- and right-threaded ends let you alter overall length by rotating the center section, enabling precise alignment and consistent results.

Fitting is standard: unscrew the existing rod ends, attach the turnbuckle to the ball studs or rod ends, rotate to reach the desired length, then secure with jam nuts or the chassis retainers. The handed threads remove the need to reposition mounting points for most adjustments.

As an upgrade, this turnbuckle provides fine control over steering geometry, helping to reduce bump steer and achieve balanced handling without replacing larger components.

Specifications

  • Item: Titanium adjustable turnbuckle
  • Material: Titanium
  • Model Number: 992455
  • Length: 55mm
  • Thread: M4
  • Handedness: Left/Right
  • Quantity: 2 pcs

A precise and light option for adjusting link lengths on M4-equipped steering and suspension systems.
Remark :
Due to limited stock availability, please notice that some HUDY items may have to order from the factory and the ready time is around 8-12 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will these fit my M4-equipped ball studs and rod ends?

Yes, they are manufactured with M4 threads to mate with common M4 ball studs and compatible rod-end fittings found on many electric and nitro R/C cars.

What tools are recommended for secure adjustment?

Small spanners or hex drivers for jam nuts and pliers for initial seating are usually adequate; avoid excessive force that could damage threads.

Should I use threadlocker on titanium threads?

Use a low-strength threadlocker if you need semi-permanent security, or light anti-seize when mixing metals to protect against galling.

How can I tell if a turnbuckle is bent after a crash?

Inspect visually for straightness and rotate between fingers; any wobble or uneven rotation indicates distortion and the part should be replaced.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved