Yokomo YOKIB414KB1 11mm Hex Kingpin Ball Pack for Aluminium Steering Blocks, 4pcs  [YOKIB414KB1]

11mm Hex Kingpin Ball — Steering Block Replacement

This 11mm hex kingpin ball from Yokomo is supplied as an RC replacement connector intended for aluminium steering blocks. The four-piece pack is suitable for swapping out worn ball ends or refreshing a steering linkage without replacing the block.

Fitment applies only where the steering block accepts an 11mm hex kingpin ball into the ball seat; confirm the seat dimensions and hex engagement on your block prior to installation. This component directly affects steering linkage geometry and feel when used in tuning work.

Installation tips: extract the old ball connector, check hex alignment and engagement, then fit the replacement 11mm hex ball ensuring it seats correctly. Use the appropriate hex driver, avoid over-tightening to protect threads and seat surfaces, and inspect for lateral play after fitting and during initial running.

For hobby RC use only, this is an accessory part intended for steering maintenance and setup tuning.