Indoor 3D 9x3.7SF Propeller Compatible with Slow-Flyers APC AP09037SF  [AP09037SF]

APC PROPELLER 9x3.7SF ELECTRIC SLOW FLYER (INDOOR 3D AEROBATICS)
Price:
£2.83
Brand:
APC
Model:
AP09037SF
Condition:
Brand New
Write a review

Product Brief for 9x3.7 Propeller

The APC AP09037SF 9x3.7SF propeller is supplied as a replacement blade for electric slow-flyer RC aircraft used in indoor 3D aerobatics. The molded composite design emphasises consistent low-speed thrust and predictable handling over high-speed performance.

To fit the propeller, confirm rotation and pitch, select the correct hub, collet, or prop saver, and make sure the shaft adapter is the right diameter to avoid play. Proper seating prevents imbalance and reduces vibration during flight.

Balance with a low-speed balancer and remove minimal material from the light side when necessary. Because this is a fixed-pitch prop, tuning should prioritise mount rigidity and vibration isolation rather than altering pitch to change handling.

Packing block not applicable.

What shaft sizes and adapters should I check before fitting?

Verify your motor shaft diameter and match the propeller hub or adapter accordingly. Using the correct adapter prevents radial or axial movement that would affect balance and increase vibration.

Is a prop saver recommended for this prop?

A prop saver can protect the prop and shaft during minor impacts and is useful on parkflyers. Ensure the prop saver size matches the hub and that it does not introduce extra play when fitted.

Why is static balancing important for indoor slow 3D?

Static balance removes tip-heavy tendencies that cause wobble at low RPM. A balanced prop gives smoother control inputs and steadier hovering, which is critical for precise indoor 3D manoeuvres.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved