INFERNO MP9/MP10 Spur 46 Tooth IF410-46C Kyosho  [KY-IF410-46C]

Kyosho IF410-46C - Spur Gear (46T/MP9)
Price:
£21.85
Brand:
Kyosho
Model:
KY-IF410-46C
GTIN:
4548565496877
Condition:
Brand New
Write a review

Spur gear details for INFERNO MP9/MP10

The Kyosho IF410-46C is a 46-tooth spur gear intended as a replacement for the INFERNO MP9 and MP10 family. It is specified to restore correct tooth engagement and maintain the designed drivetrain layout.

This component is compatible with INFERNO MP9/MP10 platforms that require a 46T spur in their stock configuration. When replacing the spur, check pinion mesh, centre differential clearance and bearing condition to maintain smooth operation and even wear across the gear teeth.

When tuning, the 46T spur keeps the factory gear ratio if you use different pinion sizes, allowing controlled adjustments to acceleration and top speed without changing gearbox spacing or chassis mounts. Ensure shims are correct and backlash is within the chassis maker's recommended tolerance.

Fitment advice: remove any machining burrs from contact surfaces, secure the motor pinion correctly, and inspect nearby bearings and gearbox seals while the spur is accessible. Regular inspection prevents premature wear and keeps drivetrain losses low.
Remark :
Due to limited stock availability, please notice that some Kyosho items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Can I use this spur across different INFERNO model years?

It fits INFERNO MP9 and MP10 models that specify a 46T spur; check your chassis documentation to confirm the stock tooth count before fitting.

Why is correct backlash important with this spur?

Correct backlash ensures even tooth contact, reduces stress on bearings and gears, and prevents premature wear in the drivetrain.

What should I inspect while the spur is accessible?

Inspect pinion tightness, bearing play, gearbox seal condition and any signs of uneven tooth wear to address issues before they worsen.

Does this spur require different mounting hardware?

No special hardware is required beyond the standard mounting for INFERNO MP9/MP10 spurs; use the existing gearbox hardware and correct shims as advised by the chassis maker.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved