KC10 Pivot Ball Upgrade 5.8mm - CL028 Kyosho (8pcs)  [KY-CL028]

Kyosho CL028 - Pivot Ball 5.8mm (KC10/8pcs)
Price:
£4.67
Brand:
Kyosho
Model:
KY-CL028
GTIN:
4548565513239
Condition:
Brand New
Quantity Discount
Unit Price You Save
2 £4.14 each £1.05 or 11%
3+ £3.93 each £2.20 or 16%
Write a review

Pivot Ball Kit for KC10

The Kyosho CL028 pivot ball kit contains eight 5.8mm balls intended as replacement parts for the KC10 chassis. These components match the ball joint interface dimensions used on KC10 steering and suspension linkages and are provided for model-scale repair or maintenance tasks.

Using this set can remove slack in steering linkages and restore crisper steering feedback when fitted alongside sound cups and rod ends. Inspect mating components before installing replacements, remove worn items, and ensure seating surfaces are clean so the linkage geometry remains correct. Replacing pivot balls when needed preserves predictable suspension response and simplifies tuning work.

Installation is normally part of front-end or suspension maintenance; separate the affected linkage, fit the pivot ball into the cup or rod end, then reassemble and check for free articulation without binding. After installation, double-check alignment and reduce any excessive thread engagement to keep intended motion range.

Compatibility

  • KC10 chassis
Remark :
Due to limited stock availability, please notice that some Kyosho items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How do I identify the correct pivot ball size?

Measure the ball diameter required by your KC10 linkage; the CL028 parts are 5.8mm and should match the original joint dimensions for proper fit.

Will these work with modified linkages?

They fit linkages that accept a 5.8mm pivot ball on the KC10 platform. If linkages have been altered, confirm dimensions before fitting to avoid mismatches.

What maintenance helps extend pivot life?

Regularly clean and inspect ball cups and rod ends, replace damaged parts promptly, and avoid exposing joints to excessive dirt and moisture to prolong service life.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved