KO Propo 30217 - BSx4S One10 Grasper 2 Servo Kit Precision Low-Profile Steering Servo  [KO-30217]

KO Propo 30217 - BSx4S One10 Grasper 2 ICS Digital Servo 7.4V HCS w/61032 Servo Model Selector for 4S
Price:
£125.30
Brand:
KO Propo
Model:
KO-30217
Condition:
Brand New
Write a review

KO Propo 30217 - BSx4S One10 Grasper 2 Precision Low-Profile Servo

The KO Propo 30217 - BSx4S One10 Grasper 2 ICS Digital Servo is aimed at model builders who prioritise precise steering feel and durable construction. Its compact profile helps fit in tight bays while providing reliable power for 1/10 electric and petrol models.

Performance highlights and construction

Rated for operation from 6.0 to 7.4 volts, the servo accepts LiPo, LiFe and Ni-MH batteries. It features a brushless motor, hard alumite aluminium gears and dual ball bearings to reduce play and extend service life. The aluminium top case and heat sink middle case aid cooling, and the gold-plated connector supports a stable signal and power path.

Specifications

  • Torque: 16.0Kg-cm @7.4V, 12.1Kg-cm @6.0V
  • Speed: 0.09sec/60deg @7.4V, 0.11sec/60deg @6.0V
  • Dimensions: 40.5x26x21mm (Low Profile)
  • Weight: 51.0g
  • Operating Voltage: 6.0~7.4V
  • Motor Type: Brushless
  • Gears: Hard Alumite Aluminum
  • Bearings: Dual Ball Bearings
  • Cable: Black with Gold Plated Connector
  • Compatibility: Serial & HCS

Well suited as an upgrade servo for road and off-road 1/10 models, it combines compact sizing with robust internals for consistent control.
Remark :
Due to limited stock availability, please notice that some KO Propo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will this servo handle wheel-to-wheel competition?

The servo's torque and speed are suitable for many club-level and regional race classes, but confirm class rules on servo specs before use in regulated events.

How do I check the servo for smooth bearings?

Disconnect power and spin the output horn by hand to feel for smooth rotation. Any grinding or tight spots indicate bearing or gear issues that should be addressed.

Is the gold-plated connector standard pinout?

Yes. The cable uses a standard servo connector and wiring order, but always verify polarity and fit with your receiver or controller before final connection.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved