KO Propo 35565 RSx4S-one10X Precision Aluminum Servo Gear Set  [KO-35565]

KO Propo 35565 - RSx4S-one10X Aluminum Gear Set
Price:
£25.76
Brand:
KO Propo
Model:
KO-35565
Condition:
Brand New
Write a review

Precision aluminium gears for improved servo robustness

The KO Propo 35565 RSx4S-one10X Aluminum Gear Set provides a machined metal solution for servos prone to stripped or worn plastic gears. These aluminium components are designed to withstand higher stress and keep control inputs accurate.

Key benefits of aluminium internals

Aluminium gears offer better dimensional stability and reduced tooth deformation compared to plastic, helping to preserve steering and throttle accuracy in competition and hobby use.

Fitting advice and upkeep checklist

Ensure gear housings are clean and fasteners are torqued to spec during installation. Apply a light coat of appropriate lubricant and perform a short break-in run to verify smooth operation. Confirm compatibility with your specific servo model prior to fitting.
Remark :
Due to limited stock availability, please notice that some KO Propo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Which servos are compatible with this gear set?

The 35565 RSx4S-one10X set is intended for a selection of KO Propo servos, but you should match spline counts and dimensions to your servo before purchasing.

How do I check gear mesh correctly?

Set a small clearance between pinion and gear teeth, then rotate by hand to confirm smooth contact. Tight or loose mesh will shorten gear life and affect precision.

Will my servo electronics handle metal gears?

Metal gears can transfer higher loads to the servo electronics and motor. Ensure your servo and its power supply are rated for the intended demands to avoid overheating or stress.

What regular maintenance is recommended?

Periodically clean out debris, reapply light lubricant, and inspect for burrs or wear. Early detection of damage prevents secondary failures in the servo assembly.

Is professional fitting required?

Most hobbyists can fit these gears with basic tools and care. If unsure about dimensions or servo internals, seek advice from an experienced technician or dealer.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved