Kyosho 30570SP MINI-Z AWD MA-010 Chassis Assembly KIT SP Limited - 1/27 Touring  [30570SP]

Kyosho 30570SP - 1/27 R/C Electric Powered Touring Car - MINI-Z AWD MA-010 Chassis Assembly KIT SP Limited
Price:
£143.91
Brand:
Kyosho
Model:
30570SP
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

MA-010 MINI-Z AWD shaft-drive chassis concentrating on component-level accuracy

Chassis character and mechanical focus

The 30570SP utilises the MA-010 shaft-driven MINI-Z AWD format with defined front and rear differential detailing and independent suspension at each corner. Ball bearings are used across the drivetrain and an aluminium motor holder is fitted to reduce friction and stabilise rotational action on this compact 1/27 scale platform. Being a kit, it excludes a circuit board so builders can fit their chosen receiver and transmitter for either 27MHz or ASF 2.4GHz compatible Mini-Z systems.

Design notes and special edition elements

The SP Limited edition stresses component quality rather than paint options. Highlights include an aluminium motor cover, a dedicated front ball differential set, a plated terminal chassis finish, and a separately coloured receiver cover for ASF 2.4GHz installation. The blend of shaft drive and precision gearing offers steady handling and makes controlled drift transitions achievable with compatible Mini-Z radio gear.

Who this kit suits

This assembly kit is designed for model makers who prioritise mechanical fidelity and parts detail. Without onboard electronics, it is aimed at those who will supply their own Mini-Z-compatible radio units and batteries. Limited production numbers increase attractiveness for MINI-Z collectors.

Specifications

  • Label: Kyosho 30570SP - MINI-Z AWD MA-010 Chassis Assembly KIT SP Limited
  • Scale: 1/27
  • Chassis type: Shaft-driven AWD MA-010
  • Length: 127.5 mm (M) / 131.5 mm (L)
  • Width: 65.0 - 72.0 mm
  • Height: 43.0 mm
  • Wheelbase: 90.0 mm (M) / 94.0 mm (L)
  • Tread (F/R): 56.5 - 63.5 mm / 56.5 - 61.0 mm
  • Tire (F/R): Diameter 25.0 mm x Width 8.5 mm / Diameter 25.0 mm x Width 8.5 mm, 11.0 mm
  • Gear Ratio: 7.2, 6.4, 6.0, 5.7, 4.3, 5.0, 4.5 : 1
  • Weight: 130 g (approx.)
  • Motor: Xspeed V Motor
  • Electronic Speed Control (ESC): Not Included

The Kyosho 30570SP MINI-Z AWD MA-010 assembly kit places component precision above included electronics, offering a compact shaft-driven AWD chassis with full ball-bearing specification and aluminium hardware. It is aimed at experienced Mini-Z hobbyists and collectors planning to install their own radio equipment and preferring a parts-focused limited edition.

Can I adapt this chassis for alternative Mini-Z radio systems?

Yes. The kit is compatible with standard Mini-Z receivers; you can install either a 27MHz receiver or an ASF 2.4GHz module inside the supplied receiver cover, provided the selected unit matches the mounting points and dimensions.

Is the model ready to run out of the box?

No. This is an assembly kit and does not include a circuit board, receiver, ESC, transmitter, or batteries. Builders must provide their own radio gear and power source.

Which SP Limited parts should I expect to last longest under regular use?

The ball bearings in the drivetrain, the aluminium motor holder and cover, and the plated terminal chassis surfaces are the components most likely to sustain performance and longevity with normal maintenance.

Are MR-015 bodies interchangeable with this chassis?

Some MR-015 bodies can be used if their wheelbase and mounting align with the MA-010 M or L settings. It is important to confirm wheelbase and mounting compatibility prior to trimming or installing a body shell.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved