Kyosho has released MINI-Z AWD SUBARU IMPREZA with Aero Kit and CFRP hood Metallic Yellow in 1/27 R/C Models MINI-Z MA-020 RTR (Ready-to-Run) under On-Road category
To bring its powerful performance to more motorists, the MINI-Z AWD is for sale in a Readyset. The MA-020 framework features VCS (variable camber suspension system) in front part that optimizes camber modification with suspension system move and a specially developed circuit board. The framework design enables area for installing the optional gyro product. The gyro could possibly be modified by switching somewhat quantity about the framework to mirror the quantity of steering modification in response to alterations in framework posture, enabling beginners through to professionals to operate a vehicle in relation to their full potential. Fully fitted out with accuracy ball bearings, the high drive effectiveness of MA-020 framework is complimented into the Readyset by the initial scale human anatomy and 2.4GHz Syncro KT-531P R/C system that really needs no regularity musical organization setting; all at a fantastic value cost. Just set the batteries to savor the excitement of drift driving using the included group of drift tires. The framework works with the most of ASC MINI-Z figures (additional elements possibly needed for someone designs). The MINI-Z AWD guarantees an original realm of dramatic competition action for you to experience and luxuriate in.
●MINI-Z AWD Readyset dedicated to MA-020 framework.
●Special circuit board updated with optimized steering control program.
●Chassis features gyro sensitiveness modification function.
●Drift tires are put up as standard.
●Readyset calls for only batteries become prepared to use it!
●Features 2.4GHz Syncro KT-531P transmitter that could require no setup of frequency bands.
●Factory finished human body comes with display model quality finish.
●Features VCS (variable camber suspension system system) that adjusts camber in accordance with suspension system swing.
●Coil springtime on front suspension system system can be simply changed without tools.
●wide range of optional elements can be acquired become installed.
●Note) Optional ICS cannot be utilized. Additionally, this model is very designed for the KT-531P transmitter. It isn't suitable for the KT-18, KT-19, EX-5UR ASF, EX-6 or EX-6R transmitters. Its merely appropriate the first gyro device (provided separately).
Belated model needs was in reality developed inside 2nd generation Subaru Impreza. Hawkeye headlights completed the solid face using this type of unit that formed the beds base for aero tuning featuring big back wing and differing ducts.
Includes trendy design of Syncro KT-531P transmitter. Features steering / throttle trim and double cost modification of steering angle and control the blinking speed of optional LEDs. Also, the transmitter has an exercise Mode function which limits rate connected with vehicle for effortless learning (standard environment at the time of delivery is Training Mode).
Special AWD Sports framework is created within the MA-02 chassis and features the RA45 unit.
Features VCS front suspension system that optimizes camber improvement in concert with suspension system system stroke. Replacement of front suspension system system coil springs is straightforward without tools needed.
Fashioned with strut-type right back suspension system.
Complete bearing demands contain 14 ball bearings.
Loaded with drift tires as standard.
Packed with special mount space and gyro modification amount the optional gyro unit (sold separately).
- Length 155.0mm
- Width 68.0mm
- Height 51.0mm
- Chassis MA-020-N
- Wheelbase 90.0mm(M)
- Tread F : 58.5mm R : 58.5mm
- Tire F : 25.0mmx8.5mm R : 25.0mmx8.5mm
- Gear ratio 7.236.385.715.975.344.974.5:1
- Front Wheel Offset Narrow +1.0mm
- Rear Wheel Offset Narrow +1.0mm
- R/C System Syncro KT-531P
- Weight 193g
- R / C device incorporated complete framework
- Painted and marked complete body
- Syncro KT-531P transmitter
- Mini pylon
- Pinion gear (15T, 17T, 19T, 21T)
- Spur gear (27T, 29T, 31T)
- free nut
- Wheel wrench
- Pinion reduction unit
REQUIREMENT TO OPERATE
- AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
- AAA-size alkaline batteries x 4 for transmitter