Kyosho has released MINI-Z AWD DODGE CHALLENGER SRT HELLCAT REDEYE Sublime in 1/27 R/C Models MINI-Z MA-020 RTR (Ready-to-Run) under On-Road category
To bring its powerful performance to more motorists, the MINI-Z AWD is actually easily obtainable in a Readyset. The MA-020 framework features VCS (variable camber suspension system system) in the front component that optimizes camber modification with suspension swing and a specially created circuit board. The framework design permits area for creating the optional MZW446 gyro device. The gyro is modified by turning significantly amount on framework to reflect the quantity of steering modification answering alterations in framework position, allowing novices all the way through to specialists to make use of a motor vehicle with their complete potential. Totally fitted away with accuracy ball bearings, the high drive effectiveness the MA-020 chassis is complimented in Readyset by initial scale human anatomy and 2.4GHz Syncro KT-531P R/C system that requires no regularity band environment; all at a good value cost. Simply set the batteries to have enjoyment from the excitement of drift driving aided by the included few drift tires. The framework works together with the majority of ASC MINI-Z numbers (additional elements perhaps necessary for somebody designs). The MINI-Z AWD guarantees an exceptional world of dramatic racing action to be able to experience and luxuriate in.
●MINI-Z AWD Readyset devoted to MA-020 framework.
●Special circuit board updated with optimized steering control system.
●Chassis features gyro sensitiveness modification function.
●Drift tires are set up as standard.
●Readyset requires just batteries become ready to make use of it!
●Features 2.4GHz Syncro KT-531P transmitter which will require no setup of regularity bands.
●Factory completed human body includes display model quality finish.
●Features VCS (variable camber suspension system) that adjusts camber in accordance with suspension system swing.
●Coil springtime on front suspension system can be simply changed without tools.
●wide selection of optional elements can be acquired become installed.
●Note) Optional ICS cannot be used. Additionally, this model is specifically designed the KT-531P transmitter. It is not suitable for the KT-18, KT-19, EX-5UR ASF, EX-6 or EX-6R transmitters. Its simply suitable for the initial gyro unit (provided individually).
The ‘Hellcat’ may be the pure concept of US muscle tissue. Having its 6.2ℓV8 supercharged motor producing a brutal 797 horsepower, the Hellcat may be the superior design of Dodge Challenger lineup.
Includes fashionable design of Syncro KT-531P transmitter. Features steering / throttle trim along with dual price modification of steering angle and control the blinking rate of optional LEDs. Besides, the transmitter has a workout Mode function which limits rate the vehicle for effortless learning (standard environment during distribution is Training Mode).
Unique AWD Sports framework is started on MA-02 framework and features the RA45 item.
Features VCS front suspension that optimizes camber enhancement together with suspension system system move. Replacement of front suspension system coil springs is not hard with no tools needed.
Designed with strut-type back suspension.
Complete bearing specs contain 14 ball bearings.
Made with drift tires as standard.
Fashioned with unique mount area and gyro modification volume the optional MZW446 gyro product (sold individually).
- Length 171.0mm
- Width 75.0mm
- Height 50.0mm
- Chassis MA-020-W
- Wheelbase 98.0mm(LL)
- Tread F : 64.5mm R : 62.0mm
- Tire F : 25.0mmx8.5mm R : 25.0mmx8.5mm
- Gear ratio 7.236.385.715.975.344.974.5:1
- Front Wheel Offset Narrow +1.5mm
- Rear Wheel Offset big +1.5mm
- R/C System Syncro KT-531P
- Weight 193g
- R / C item integrated complete chassis
- Painted and marked complete body
- Syncro KT-531P transmitter
- Mini pylon
- Pinion gear (15T, 17T, 19T, 21T)
- Spur gear (27T, 29T, 31T)
- free nut
- Wheel wrench
- Pinion treatment device
REQUIREMENT TO EXERT EFFORT
- AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
- AAA-size alkaline batteries x 4 for transmitter