Kyosho has released Radio Controlled Electric Powered 4WD Touring Car Mk2 FZ02 Kit in 1/10 R/C Models FAZER AWD drivetrain assembly kit under On-Road Touring Cars category
The FAZER Mk2 Readyset is perfect for the pure satisfaction of R/C automobile driving. Available these days as a chassis kit, owners have actually actually the flexibleness to include their human body and R/C system. Demands had been elevated with optional elements such as for example HD TC center shaft S and TC universal move shaft L to enhance the unrivaled symmetrical design and front-rear suspension system system safety concerning the lightweight framework for R/C racers to relish. Even though deckless design seems easy, a decreased wide range of elements improves maintenance effectiveness and optimizes torsional rigidity. Incorporation of nylon item further reduces fat and improves impact opposition. Having its unique design, the FZ02 framework embodies features and performance which will interest R/C motorists of quantities.
40percent pre-assembled (shocks and diff gears are not full of oil therefore put up may be completed to favored environment). The FZ02’s effective low center of gravity design compliments the high power and rigidity recognized through front side & back stiffeners and rib reinforcement at key chapters of framework.
Duralumin HD TC center shaft S (FAW209) provides increased rigidity set alongside the standard resin shaft within the Readyset. Including smoother driving transmission, the red anodized color has striking visual appeal.
TC Universal swing shafts L (FAW202) concerning the front drive component don’t fall on hefty contact like dog bone tissue tissue shafts. Also, the move shafts deliver constant drive transmission although joint are in an extensive steering angle.
A specific resin transponder mounting stay is roofed for once the framework is contending in competition tasks. You don't need to create a handmade stay or holes within the body to accommodate a transponder.
Included human body mounts enable systems from different manufacturers become fitted. Also, two different brake-disk wheel hubs enable 190mm and 200mm chassis width settings for compatibility with various human anatomy types.
Included aluminum dish protects the engine from dirt and provides effective temperature dissipation, particularly into the heat of summer season rushing.
Oil shocks and springs optimize the front-rear geometric protection, delivering both light managing and accurate control. (Silicone oil the shocks is sold independently)
Bump steer and scrub radius, the 2 factors utilising the best affect managing, have already been optimized in to the front suspension system system. Interchangeable front-rear and left-right hub providers improve elements efficiency and upkeep.
Original low-profile semi-slick pattern tires and inside sponge (FAT701M) match 15-spoke black colored colored tires for improved rushing appeal.
TECHNICAL INFORMATION
- Length 375mm
- Width200mm/190mm
- Ground approval 8mm (approx.)
- Wheelbase 260mm
- Tread(Body width:190mm)F:164mm/R:164mm
- Tread(Body width:200mm)F:174mm/R:174mm
- Tires F: 66mm x 25mm/R:66mm x 25mm
- Gear Ratio 6.54:1
- Total closet fat Approx. 1490g (with 7.4V / 4000 LiPo)
KIT CONTENT
- 40per cent pre-assembled chassis
- FAW202 TC Universal Swing Shaft S
- FAW209 HD TC Center Shaft S
- Aluminum engine Dust Plate
- transponder mounting stay
- +0mm off-set wheel hub & M4 x 16 Wheel screw(for 190mm width human anatomy)
- +5mm off-set wheel hub & M4 x 22 Wheel screw(for 200mm width body)
- human body mounts for different manufacturers numbers
- FAT701M TC Tires(M)
- inside Sponge
- VZH003BK Wheel
- 1.5/2.0/2.5mm Hexagonal wrench
- 3/4/5/5.5/7/8mmSpanner
REQUIREMENT TO WORK
- 2ch 1 servo R/C system for cars(Receiver size:L45xW28xH22mm or less)*Recommended things No.82138/82151
- Body
- 540-550 course engine *Recommended solutions No.37031/37032
- ESC right for engine used(Size:L36xW32xH23mm or less)*Recommended services and products No.37051
- Survo *Recommended services No.82273
- Battery charger
- Battery for framework suited to ESC used(SIze:L145xW47xH25mm or less)*Recommended services and products No.GAB4201
- 4 x AA batteries for transmitter
- Damper Oil *Recommended services and products No.SIL0400-8
- Grease(for Ring Gear & Diff)*Recommended products and services No.96162
- Silicone OIL(for Diff)*Recommended solutions F:No.SIL50000/R:No. SIL3000
- Velvet Coating Pinion Gear No.PNGA4832 - No.PNGA4837 (For brushless motor )
- metal Pinion Gear No.PNGS4829 - No.PNGS4836 (For brushless engine )
- Paint for polycarbonate human anatomy
- Tools
