Kyosho 36112 2.0mm Hex Driver - Workshop Tool  [KY-36112]

Kyosho 36112 - KRF Hex Wrench Driver 2.0mm
Price:
£0.00
Brand:
Kyosho
Model:
KY-36112
GTIN:
4548565198498
Please kindly input your name and email address, we will inform you once we have the restocking.
Write a review

Slim 2.0mm hex driver aimed at truck-series RC maintenance

A no-nonsense 2.0mm hex driver intended for 1/10 truck-series RC use. The precise 2.0mm tip suits the hex screws typically found in suspension linkages, servo mountings and small accessory brackets on scaled trucks. It acts as a reliable hand tool for assembly, service work and setup tweaks where a small hex driver is needed.

Typical applications

  • Turn 2.0mm hex screws in chassis components and body fixing points.
  • Use in pre-run inspections to confirm steering, shocks and accessory fastenings are secure.
  • Its small form factor is convenient for bench work and trackside adjustments.

Care and best practice

  • Ensure the tip sits square in the screw to reduce cam-out and prevent rounding the hex bore.
  • Keep the tip clear of grit and filings to lengthen service life of both screw and driver.
  • Place the driver in a dedicated compartment or foam tray to protect the tip and keep spares organised.
Remark :
Due to limited stock availability, please notice that some Kyosho items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

What size screws work with this driver?

The driver is made for 2.0mm hex screws commonly used on 1/10 truck-series RC assemblies.

Can it be used for delicate setup adjustments?

Yes. The small tip size makes it suitable for careful tweaks and small torque adjustments during setup.

How do I check the tip for wear?

Inspect the tip visually for rounding or damage and test on an expendable screw if slippage is noticed; replace when worn.

Any storage recommendations to protect the tip?

Keep the driver in foam or a protective slot away from loose hardware to prevent tip damage and contamination.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved