Kyosho 82254-01 2-Way XT60 Power Connector Cable Accessory  [KY-82254-01]

Kyosho 82254-01 - 2-Way Connector (XT60 plug)
Price:
£13.83
Brand:
Kyosho
Model:
KY-82254-01
GTIN:
4548565509713
Condition:
Brand New
Write a review

Product Summary and Use

This Kyosho 82254-01 accessory provides a compact XT60-based 2-way power connection for RC models. It is intended to streamline battery to ESC wiring by offering a simple inline splitter or pigtail that keeps connections organised during setup and repair.

Fitting is done by connecting matching XT60 halves with correct polarity, then reinforcing the joint with heat shrink and a strain relief method. Always treat the unit as a wiring accessory and perform polarity and insulation checks before applying power to the system.

For tuning and on-track adjustments the splitter lets you rearrange wiring quickly, isolate power paths for testing, and minimise recurring solder work when swapping batteries or electronic components during setup sessions.
Remark :
Due to limited stock availability, please notice that some Kyosho items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How will this connector change my wiring workflow?

It centralises the power junction so you can unplug and replace batteries or ESCs faster, and it reduces the need to repeatedly solder the main harness during tuning changes.

Are there tuning scenarios where I should avoid it?

Avoid using a splitter in high-current setups unless the wiring and battery capacity comfortably handle the combined load; in such cases direct dedicated feeds may be safer.

Any tips for troubleshooting intermittent power?

Check the connector joints, heat shrink, and strain relief first; wiggle tests under low load and inspecting solder joints often reveal loose or intermittent contacts.

Is there a best practice for securing the pigtail in a race car?

Anchor the pigtail away from moving parts with cable ties, use adequate heat shrink for mechanical support, and route wires to avoid sharp edges or pinch points during chassis flex.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved