KYOSHO FW05-R/FW05RR 64-Ti Front Lower Suspension Pivot FW05-RR003B by 3Racing  [FW05-RR003B]

Kyosho FW05-R /FW05RR 64-Ti Front Lower Suspension Pin - 3Racing FW05-RR003B
Price:
£2.90
Brand:
3Racing
Model:
FW05-RR003B
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Front lower suspension pivot for FW05 chassis

Designed for KYOSHO FW05-R and FW05RR platforms, this front lower suspension pin carries the reference FW05-RR003B.

The pin provides the pivot for the lower suspension arm and maintains lower joint alignment while reducing play. Replacing a worn pin restores steering precision and helps the suspension behave consistently under load.

Fitting notes: this pin replaces the stock front lower suspension pin on FW05-R/FW05RR. Standard removal of the front lower arm and hub carrier is required; afterwards, check suspension travel, steering throw and clearances at full lock.

Tuning benefits: a tight-fit 64-Ti pin reduces lateral slack at the pivot and supports stable roll centre behaviour, making it a sensible precision service item when refining handling.

Can I use this on a race setup?

Yes, it is suitable for tighter setups where pivot play must be minimised; check that the FW05-RR003B part number is the correct match for your chassis before use.

Does the pin need periodic replacement?

Like any wear item, pins can loosen over time; inspect periodically for play and replace if steering feel becomes vague.

Should I recheck alignment after fitting?

After installation recheck toe, steering centring and that the suspension moves freely through its range to ensure no binding or interference.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved