Kyosho FW05RR Radio Bay Graphite Tray FW05-RR004 by 3Racing  [FW05-RR004]

Kyosho FW05RR Graphite Radio Tray - 3RACING FW05-RR004
Price:
£17.02
Brand:
3Racing
Model:
FW05-RR004
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Rigid graphite radio tray for FW05RR chassis

This graphite radio tray secures receiver and small electronics on Kyosho FW05RR platforms, delivering a stiff area for mounting while keeping weight low. The tray helps maintain chassis geometry under load and during setup work.

Designed as an exact-fit upgrade, the tray groups receiver, wiring and compact components to minimise cockpit clutter and simplify cable routing. Cleaner routing makes incremental balance and handling changes faster to implement.

Installation uses the FW05RR radio bay mounting points: align the tray, fasten with the OEM screws and route antenna and power leads clear of steering and suspension parts. Double-check servo and ESC placement before final tightening to keep connectors accessible.

Specifications

  • Item: Radio tray
  • Material: Graphite
  • Model Number: FW05-RR004
  • Brand: 3Racing
  • Compatibility: Kyosho FW05RR

For RC enthusiasts running Kyosho FW05RR, this graphite tray provides a compact, stiff mount that keeps wiring neat and aids quicker servicing.

Is the tray a direct OEM replacement?

The tray is intended as a direct-fit upgrade for the FW05RR radio bay but check the mounting holes on your chassis before securing.

Will it fit with foam-mounted receivers?

Yes, there is space for foam pads or double-sided tape; use padding to isolate the receiver from the graphite surface where needed.

Any special maintenance for graphite trays?

Inspect mounting screws for tightness and check for surface wear; replace pads if mounting foam becomes compressed.

Can I use this tray on other Kyosho models?

It is specified for FW05RR. Fit to other models is not guaranteed and should be verified against the target chassis mounting pattern.

Does graphite interfere with sensors or electronics?

Graphite can be conductive; avoid direct contact between bare circuit boards and the tray and use insulation where necessary.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved