Kyosho GAB2303 - Gensace 1950mAh 11.1V 30C LiPo (XT60H-F)  [KY-GAB2303]

Kyosho GAB2303 - Gensace LiPo 1950mAh (30C/11.1V/??????/XT60H-F)
Price:
£0.00
Brand:
Kyosho
Model:
KY-GAB2303
GTIN:
4548565525744
Write a review

Product summary: 11.1V LiPo for electric models

The Kyosho GAB2303 Gensace LiPo 1950mAh is intended for hobby electric models that accept an 11.1V supply and use an XT60H-F discharge connector. The specification highlights key electrical data — nominal voltage 11.1V, capacity 1950mAh, and a 30C continuous discharge rating — which describe expected run times and voltage behaviour under load without listing cell count or physical dimensions.

Mounting the pack is simple on chassis built for 11.1V batteries and the XT60H-F plug, but always check the battery bay for clearance and ensure the connector orientation is correct before final installation. Fasten the pack with the vehicle strap or a low-compression bracket and route wiring clear of moving suspension and drivetrain parts to avoid damage.

In terms of setup, the 1950mAh capacity offers a compromise between weight and run-time for race and practice sessions, while the 30C rating provides predictable voltage sag under moderate loads. Adjusting pack placement alters the front-to-rear balance and can be used to fine-tune handling without changing suspension settings.

Use a compatible LiPo charger and carry out balance-charge cycles when available, store at recommended storage voltage, and inspect the pack for swelling or damage before and after use. Do not attempt cell repairs and follow local guidance for disposal of lithium batteries.

Remark :
Due to limited stock availability, please notice that some Kyosho items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.
The pack is supplied with an XT60H-F discharge connector. When connecting, confirm correct polarity and ensure the lead is secured to prevent accidental disconnection or chafing during use.
It can replace other 11.1V packs if the connector type, capacity and the physical envelope match your chassis. Always check the battery bay dimensions and the resultant weight distribution before fitting.
Use a LiPo-capable charger set for 3S (11.1V) and perform balance charging where possible. Charge at a moderate current suited to the pack's capacity to preserve cell health.
The 1950mAh capacity and 30C rating determine weight and voltage delivery; both affect throttle response and lap-to-lap consistency. Moving the pack will change balance and can be used to tune handling characteristics.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved