Kyosho Inferno MP7.5 3mm Alloy-7075 Upper Deck Replacement HMP75014 by GPM  [HMP75014]

Kyosho Inferno MP 7.5 Option Alloy-7075 Upper Deck (3mm Thick) With Screws - 1pc set - GPM HMP75014
Price:
£8.58
Brand:
GPM
Model:
HMP75014
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Replacement upper deck for Inferno MP7.5

This 3mm Alloy-7075 upper deck is made for the Kyosho Inferno MP7.5 chassis and is supplied as a single replacement part with mounting screws. The plate uses Alloy-7075 at 3mm thickness as noted in the product title and is intended to take the place of the stock upper deck on compatible vehicles.

The component locates and stiffens the central chassis stack, affecting roll coupling and steering characteristics when used with your current suspension and motor components. Treat the alloy plate as a tuning upgrade because changes to handling will vary with the whole vehicle setup.

Fitting follows standard procedure: remove the body and old fasteners, align the new deck on the chassis posts and secure using the supplied screws. Confirm clearance around the servo, ESC and motor wiring before final assembly to avoid contact issues.

Packing includes

  • Upper deck - 1 pcs
  • Screws - included

Original Name / Part No:

GPM HMP75014

Is this a direct swap for the stock upper deck?

Yes, it is intended as a direct replacement for the stock MP7.5 upper deck, though you should confirm post heights and spacer positions before tightening hardware.

How long does installation usually take?

A straightforward swap typically takes 15-30 minutes depending on your workshop setup and whether you need to re-route wiring or adjust spacers.

Should I expect to change ride settings after fitting?

You may want to revisit spring rates and anti-roll settings, as the alloy deck can alter chassis stiffness and handling balance.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved