Kyosho Mini-Z AWD Fixed 3 Degree Rear Toe Link AWD-09/3 by 3Racing  [AWD-09/3]

Fixed 3 degree rear toe link for Mini-Z AWD

This rear toe in/out linkage is made for the Kyosho Mini-Z AWD chassis to replace the standard rear link and ensure a repeatable 3 degree toe setting. Supplied in purple, the part is aimed at modellers who need consistent geometry for setup work on Mini-Z AWD cars.

The linkage provides a defined rear toe so you can compare handling adjustments with confidence. Install it when you want a consistent rear baseline for corner entry behaviour or for evaluating suspension and tyre changes.

Installation notes: remove the original Mini-Z AWD rear toe linkage, move over any ball cups or spacers required from the factory part, and secure the new linkage with the OEM hardware. Verify the threads are fully engaged and that the linkage moves smoothly through its travel without binding before driving.

Tuning tips: begin from the stock toe, fit the 3 degree unit and then make small, measured adjustments while swapping front toe or roll center settings. Test on a uniform surface to judge effects, since slight toe shifts primarily change turn-in and mid-corner rotation.