KYOSHO Mini-Z AWD Low-Friction Delrin Ridge Rims 8.5mm 1.5mm Offset DMZA601F/R+1.5 by GPM  [DMZA601F/R+1.5]

Delrin ridge rims designed for short-track control

This front and rear ridge rim set is aimed at KYOSHO Mini-Z AWD platforms and is designated DMZA601F/R+1.5. The rims use Delrin material and are specified with a 1.5mm offset and 8.5mm width as an aftermarket wheel option for Mini-Z AWD machines.

Delrin provides stable dimensions and a low-friction bead seating surface, which benefits narrow tyre profiles and fine steering trims common in indoor and club circuits. These rims let you adjust tyre pairing and handling without reworking suspension geometry.

Fitting is performed like other Mini-Z AWD wheels: remove the factory rim, place the Delrin rim onto the wheel hex or adaptor compatible with MR-03 AWD-series cars, then fasten with your regular retention hardware. Always inspect tyre seating and side clearance when testing different offsets and widths, and rebalance tyres after mounting.

Setup advice: the 1.5mm offset alters track width slightly from stock and can change turn-in responsiveness and lateral grip; test these rims while tuning front/rear balance to achieve the desired handling.