Kyosho Mini-Z MR-015 Rear Aluminium 5-Spoke Rim +0.5 Offset - MR02-RP05/LB by 3Racing  [MR02-RP05/LB]

Price:
£3.64
Brand:
3Racing
Model:
MR02-RP05/LB
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Two-tone rear rim for Mini-Z racers

A two-tone light blue aluminium 5-spoke rear rim featuring a +0.5 offset, made to suit Kyosho Mini-Z MR-02 (MM/RM) and MR-015 rear wheel fittings. It is intended for precise wheel spacing and small handling tweaks on compact on-road Mini-Z cars.

Compatibility is restricted to the specified Kyosho Mini-Z variants; ensure your chassis uses the same rear wheel mounting system before fitting. The +0.5 offset adjusts rear track width slightly and can assist with tyre clearance and small changes to balance when refining camber or roll characteristics.

Mounting notes: swap this rim into your existing rear tyre and hub, confirm tyre seating and secure with glue where necessary, then check for body or suspension interference at full travel and steering lock. Verify wheel hex engagement and reapply the recommended torque to avoid slippage during running.

Will this rim fit both MR-02 and MR-015?

It is compatible with the MR-02 (MM/RM) and MR-015 rear wheel mounting patterns listed. Check your rear hub type to be certain before purchasing.

Does the +0.5 offset require other changes?

No major modifications are usually needed; the offset slightly alters track width and clearance. Confirm there is no shell or suspension interference and fine-tune setup as required.

How should I look after these rims?

Wipe off dirt after running, avoid heavy knocks that can deform alloy, and inspect fastening and hex engagement after initial testing.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved