Kyosho MZ414B R/C Unit Set 2.0 for MINI-Z MR-03RWD/RA38 - Driver Focused Unit  [KY-MZ414B]

Kyosho MZ414B - R/C Unit set2.0(MINI-Z MR-03RWD/RA38)
Price:
£46.88
Brand:
Kyosho
Model:
KY-MZ414B
Condition:
Brand New
Write a review

Control Upgrade for MINI-Z MR-03RWD Using Kyosho MZ414B

The Kyosho MZ414B R/C Unit Set enhances steering stability and gives drivers finer control over chassis behaviour on MINI-Z MR-03RWD models. It is intended for straightforward replacement or upgrade of the existing control board.

Supported Boards and Fit

The MZ414B is designed for the MINI-Z MR-03RWD and supports both blue board RC units and green board units that show a blue mark on the gyro connector. Confirming that mark avoids connector incompatibility during fitment.

Practical Installation Hints

Ensure the gyro connector marking on green boards matches and route cables clear of steering linkages. After installation, perform a short, low-speed run to check steering centring and gyro behaviour before pushing performance limits.
Remark :
Due to limited stock availability, please notice that some Kyosho items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Is this unit compatible with non-RWD MINI-Z cars?

The Kyosho MZ414B is made for MR-03RWD. Other MINI-Z platforms may differ in mounting and connector layout, so check the physical fit and connector type before assuming compatibility.

How do I know if my green board is marked correctly?

Look for the blue marking at the gyro connector socket. That mark indicates the wiring and pinout match the MZ414B requirements for safe connection.

Can I adjust gyro gain after installing the unit?

Yes. Fine tuning gyro gain and steering trim via your transmitter or compatible setup tool will help you adapt the car to different surfaces and driving styles.

What checks should I run before my first full-speed session?

Confirm connectors are secure, verify correct gyro direction and steering centring, and run a few gentle laps to ensure settings are stable before full-speed runs.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved