Kyosho MZW131 Mini-Z Setting Shim Set 0.2mm/2pcs  [KY-MZW131]

Kyosho MZW131 - Mini-Z Setting Shim set (0.2mm/2pcs.)
Price:
£0.00
Brand:
Kyosho
Model:
KY-MZW131
GTIN:
4548565522699
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Fine 0.2mm shims for Mini-Z

This Kyosho MZW131 setting shim set contains two 0.2mm spacers intended for small, precise adjustments on Mini-Z models. The pair is ideal for repeatable clearance tweaks without part replacement.

Compatibility: specified for the Mini-Z MR-03 chassis. These shims are useful when you prefer reversible spacing changes rather than permanent modifications.

Applications include trimming gear mesh clearance, remedying slight transmission misalignment, and setting contact points in confined assemblies. The thin profile allows neat stacking to reach combined thicknesses while keeping results predictable.

Fitting advice: confirm that a shim is the correct fix, insert it at the mating surfaces requiring spacing, check that components rotate freely after installation, and re-check under a light operational load. Avoid over-adjusting with too much shim thickness.

Storage advice: retain the two pcs together and label thickness if you retain other sizes so that future setups remain consistent.
Remark :
Due to limited stock availability, please notice that some Kyosho items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

What exactly is in the kit?

Two 0.2mm metal setting shims supplied as a matched pair.

Are these suitable for non-MR-03 Mini-Z variants?

The item is listed for MR-03 fitment; they may fit other Mini-Z types but you should verify clearance and geometry before committing to final assembly.

How do I avoid creating binding when using shims?

Start with a single shim, rotate all moving parts manually to detect any tight spots, and only add thickness in small increments if needed to prevent binding.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved