Kyosho V One series rear graphite SSG body post mount plate V3R-039 by 3Racing  [V3R-039]

Kyosho FW05-R /FW05RR /V One R /V One RR Evolution /V One RRR /V One SII /V One SIII /V One RRR Evo Rear SSG Graphite Body Post Plate - 3Racing V3R-039
Price:
£5.50
Brand:
3Racing
Model:
V3R-039
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Graphite rear post mount for 1/10 touring chassis

Designed for the 1/10 Kyosho touring chassis listed below, this rear graphite body post plate is supplied as V3R-039. It replaces the OEM rear body post plate and retains the SSG-style post spacing used on Kyosho models.

The graphite plate lowers mass and raises stiffness at the rear mount, which helps minimise unwanted flex between the body shell and chassis during aggressive cornering. This product is intended for RC-scale chassis use only.

Fitment notes: confirm your existing post spacing and screw pattern prior to installation, retain original screws where possible, and inspect body alignment after fitting to avoid contact with the tyre or suspension. Minor shell trimming may be required depending on body profile and mounting heights.

Tuning impact: a firmer anchor for the rear posts helps preserve aerodynamic profile and stabilise body roll behaviour, particularly useful on stiffer suspension setups or when aiming for consistent lap-to-lap body position.

Compatible Models

  • Kyosho FW05-R
  • Kyosho FW05RR
  • Kyosho V One R
  • Kyosho V One RR Evolution
  • Kyosho V One RRR
  • Kyosho V One SII
  • Kyosho V One SIII
  • Kyosho V One RRR Evo

What should I check before installing the plate?

Measure the post spacing and verify the screw pattern against the plate holes, then confirm screw length to avoid interference with suspension or body fitment.

Does this plate alter ride height or require shell modification?

It is intended to match the OEM post height, though slight shell trimming or ride height adjustment may be needed depending on your chosen shell and setup.

Will it improve consistency under braking and cornering?

Yes, by stiffening the rear mount the plate helps maintain consistent aero and body positioning, which can reduce variability during heavy braking and corner transitions.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved