Kyosho PNGS4824 Precision 24T 48P Steel Pinion  [KY-PNGS4824]

Kyosho PNGS4824 - Steel Pinion Gear(24T-48P)
Price:
£6.68
Brand:
Kyosho
Model:
KY-PNGS4824
Condition:
Brand New
Quantity Discount
Unit Price You Save
3 £5.49 each £3.58 or 18%
2+ £5.78 each £1.82 or 14%
Write a review

Precision Pinion for 1/10 Scale Models

The Kyosho PNGS4824 Steel Pinion Gear is a precision replacement part suited to a variety of RC cars. Its 24-tooth, 48-pitch specification ensures predictable mesh for common spur pairings.

Consistent Performance

Designed to deliver steady tooth engagement, this steel pinion stands up to repeated running while maintaining reliable power transfer. Regular checks will keep the unit performing well over time.

Compatibility Overview

The Kyosho PNGS4824 is compatible with many models built around 48-pitch gearing and 1/10 scale dimensions. Fitting is standard for those familiar with pinion-spur setups, with small mesh adjustments often needed for optimum operation.
Remark :
Due to limited stock availability, please notice that some Kyosho items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How do I check the gear mesh correctly?

Set the pinion on the motor, install the spur, then use a small shim or a strip of paper between teeth to achieve a snug but not tight mesh. Tighten motor mount and recheck after a short run.

Is this suitable for vintage or retro builds?

If the vintage model uses 48-pitch gearing and the shaft dimensions match, the Kyosho PNGS4824 can serve as a durable replacement, preserving original drive characteristics.

What signs indicate the pinion needs replacing?

Look for rounded tooth edges, chipped teeth, or noisy meshing. Any of these indicate reduced efficiency and a need to swap in a new pinion to protect the spur.

Can I pair this with a higher torque motor?

You can, but be mindful of increased stress on gears. Ensure the spur is in good condition and that the mesh is set correctly to avoid premature wear when using a higher torque setup.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved