Kyosho SCW041 Tomahawk 85WC Handling King Pin Set  [KY-SCW041]

Overview: purpose and benefits

The Kyosho SCW041 Handling Adjust King Pin Set is an RC spare tailored for Tomahawk 85WC use and noted as optional for Scorpion-series chassis where the pivot geometry is compatible. By trimming the outer diameter below the standard 4.0mm, the set provides a controlled increase in steering pivot clearance to reduce over-sensitive steering on slick surfaces.

Contained are two sizes, 3.9mm and 3.8mm, for incremental setup changes. Switching to a smaller outer diameter increases lateral play at the pivot which can soften abrupt steering reactions and improve stability in straight sections while maintaining adequate turn-in for corner tuning.

Fitting guidance: these kingpins are intended as direct replacements on Tomahawk 85WC assemblies and may fit Scorpion-series frames using the same pivot interfaces. Only slight steering geometry differences should occur; no chassis modification should be required when the part matches the pivot. Proceed with measured tests after each change.