LAW88 One-Way Slipper Adjust Screw & Spring Replacement for LAW88 - Kyosho LAW88-03  [KY-LAW88-03]

Kyosho LAW88-03 - Adjust Screw & Spring Set (ZX7.5)
Price:
£0.00
Brand:
Kyosho
Model:
KY-LAW88-03
GTIN:
4548565524600
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Adjust screw and spring for LAW88 slipper assembly

This Kyosho LAW88-03 replacement set supplies the adjust screw and spring components intended for use with the LAW88 one-way slipper clutch in RC vehicles. These parts are designed to set preload and tune engagement characteristics inside the slipper hub without affecting primary drive ratios.

The set is useful for renewing tired adjusters or springs, returning predictable slipper action, or for measured tuning to adjust traction transfer. The adjust screw defines preload and the spring controls resistance; subtle screw movements produce clear changes in engagement feel.

Fitment advice: remove the slipper housing in accordance with your chassis guide, replace the old adjust screw and spring with the supplied parts, and reassemble. Make conservative adjustments and bench-check engagement before aggressive running. This product is intended specifically for the LAW88 one-way slipper clutch assembly.
Remark :
Due to limited stock availability, please notice that some Kyosho items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Which assembly exactly does this service?

It services only the LAW88 one-way slipper clutch assembly, replacing the internal adjust screw and its spring to restore intended engagement traits.

Is professional installation recommended?

For most hobbyists, basic mechanical skills are sufficient; however, refer to your chassis manual. Use correct small drivers and take care during reassembly to avoid misalignment.

When should I replace this adjust screw and spring?

Replace them if you observe inconsistent engagement, visible wear, or corrosion. Regular inspection during slipper servicing will reveal when replacement is needed.

Any tips for tracking tuning changes?

Keep a simple log of adjust screw positions and test results. Recording each small change helps identify the most effective setting for your track or surface.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved