LAZER ZX7.5 Compatible Aluminium Front Suspension Holder LA433 by Kyosho  [KY-LA433]

Aluminium front suspension support for ZX7.5

The Kyosho LA433 aluminium front suspension holder is an RC-scale replacement manufactured for the LAZER ZX7.5 chassis. It takes the place of the standard front holder and offers a more rigid attachment point for the front suspension components on the model.

Made in gunmetal-finished aluminium, the component delivers a firmer bearing surface than common plastic parts, aiding alignment retention under repeated loads. It functions mainly as structural support for the front assembly and as a consistent reference when adjusting suspension settings rather than as a means to alter baseline geometry.

Fitting instructions: remove the existing front holder and move any re-usable hardware such as pins or ball studs, then fit the LA433 into the original mounting points and secure with the chassis screws. Check that threads are engaged and verify clearances around steering linkages and dampers before final tightening. Use an appropriate hex driver and avoid excessive torque on small screws to prevent thread damage.

Tuning guidance: this holder supplies a repeatable reference for shock and steering positions when changing spring rates, shock oil or camber link lengths. It does not include shock mounts or ball studs, so keep those from the original build or fit compatible replacements specified for the LAZER ZX7.5 platform.