Left Rear Wheel Hub with Counter Weight for R12C3 and R12C31 - Yokomo R12-24HL3  [R12-24HL3]

Yokomo R12-24HL3 Left Wheel Hub w/counter weight forR12C3
Price:
£5.57
Brand:
Yokomo
Model:
R12-24HL3
GTIN:
3888
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - R12 category
Write a review

Optimise rear-end handling

The Yokomo R12-24HL3 left rear wheel hub is an RC replacement item created to address rear traction imbalance on R12C3-series chassis. Increasing the left hub thickness and adding a counter weight helps even out the forces transmitted around the rear axle, which can reduce asymmetric cornering tendencies.

The hub profile is arranged to improve rotational balance and limit uneven spin that can raise driveline losses at higher speed. It is best used when tuning rear traction symmetry or when stabilising rotation under lateral load; this product is a handling tune, not a major structural upgrade.

Compatibility is limited to the documented Yokomo platforms, so confirm fitment with R12C3 or R12C31 chassis before fitting. The part replaces the original left hub and retains the counter weight design; consult your chassis service manual for torque settings and bearing inspection to preserve alignment and minimise vibration.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Which Yokomo models will accept this hub?

It is intended for use with Yokomo R12C3 and R12C31 chassis. Verify your exact chassis variant and mounting points before purchasing to ensure compatibility.

Will this part change tyre wear?

By evening left/right traction, tyre scrub from unequal loading can be reduced, which may lead to more uniform tyre wear depending on driving conditions and setup.

Is additional setup tuning required after fitting?

Some setup adjustments, such as diff preload and roll centre or toe settings, may be required to fully benefit from the revised hub geometry. Check handling and make incremental changes.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved