LOSI 5IVE-TE 3.0 Rear Titanium Skid Plate 5mm Chassis 5T3/331R by GPM  [5T3/331R]

Protected rear underside for LOSI 5IVE-TE 3.0

This 1/5-scale rear chassis skid plate is manufactured from titanium and designed for the LOSI 5IVE-TE 3.0 platform. At 5mm thickness the plate provides a low-profile protective layer beneath the rear chassis to help limit abrasion and impact damage during off-road use.

The plate is produced with a wire-cut machining process so fine machining lines and occasional minor burrs at edges are normal and do not compromise strength. Small surface scratches may appear in handling or transit but are cosmetic and do not reduce the plate's ability to protect the chassis.

Mounting hardware is supplied and the unit is assembled to ease installation. For secure retention apply a medium-strength threadlocker to the mounting screws and recheck hex screw torque after initial runs. Installation requires standard hex drivers and basic access to the rear chassis area.

As a protective accessory the skid plate is not intended to modify tuning settings. It will not change suspension geometry or drivetrain ratios, but by reducing wear and offering a consistent glide surface it supports predictable behaviour when the chassis contacts obstacles.

Install this titanium rear skid to add reliable, lightweight protection for regular off-road sessions on the LOSI 5IVE-TE 3.0 and follow routine mounting checks to ensure a firm installation.