LOSI LMT 2.0 Grave Digger 4X4 Solid Axle 6061-T6 Internal Spring Shock Set 130mm & 134mm LMT2130134FR by GPM  [LMT2130134FR]

Upgraded 6061-T6 internal-spring shocks for the LMT 2.0

This aftermarket shock set is supplied for the LOSI LMT 2.0 Grave Digger 4X4 Solid Axle brushless monster truck and is intended as a replacement for the OEM LOS-1830 and LOS-1831 units. The design uses 6061-T6 aluminium shock tubes with matched caps and Delrin collars to improve seal life and resist abrasion in normal RC operation.

The kit contains two 130mm and two 134mm centre-distance shocks so you can configure front and rear fitment to suit ride height. It upsizes the shock shaft to 4.0mm and fits internal springs with a 0.8mm wire diameter; you may refit the original springs if the supplied springs are too firm. Each unit is pre-filled with 100cSt silicone oil for steadier rebound and consistent damping performance on rough surfaces.

Fitment is a direct swap using the existing mounting points on the LMT 2.0 solid-axle chassis. The package includes Delrin collars and 8.0mm ball-end heads to maintain standard linkage geometry; initial setup checks should include spring preload, oil level and fastener torque. Adjust springs and oil to match your driving conditions for best handling balance.

For UK club runs or local trails this kit delivers a more robust suspension option with larger shafts and 100cSt damping that helps control rebound and reduces the frequency of rebuilds versus stock components.