LOSI MINI-T 2.0 Rear Dog Bone Strengthened 2.9mm LM495S/SH by GPM  [LM495S/SH]

TEAM LOSI MINI-T 2.0 2WD #45 Harden Steel Dog Bone For Rear CVD - 2pc set - GPM LM495S/SH
Price:
£5.13
Brand:
GPM
Model:
LM495S/SH
GTIN:
4894538348989
Condition:
Brand New
1 Reviews
Write a review
alt="TEAM LOSI MINI-T 2.0 2WD #45 Harden Steel Dog Bone For Rear CVD - 2pc set - GPM LM495S/SH" title="TEAM LOSI MINI-T 2.0 2WD #45 Harden Steel Dog Bone For Rear CVD - 2pc set - GPM LM495S/SH"
alt="TEAM LOSI MINI-T 2.0 2WD #45 Harden Steel Dog Bone For Rear CVD - 2pc set - GPM LM495S/SH" title="TEAM LOSI MINI-T 2.0 2WD #45 Harden Steel Dog Bone For Rear CVD - 2pc set - GPM LM495S/SH"
alt="TEAM LOSI MINI-T 2.0 2WD #45 Harden Steel Dog Bone For Rear CVD - 2pc set - GPM LM495S/SH" title="TEAM LOSI MINI-T 2.0 2WD #45 Harden Steel Dog Bone For Rear CVD - 2pc set - GPM LM495S/SH"
alt="TEAM LOSI MINI-T 2.0 2WD #45 Harden Steel Dog Bone For Rear CVD - 2pc set - GPM LM495S/SH" title="TEAM LOSI MINI-T 2.0 2WD #45 Harden Steel Dog Bone For Rear CVD - 2pc set - GPM LM495S/SH"

MINI-T 2.0 Rear Dog Bone Summary

The LM495S/SH dog bone is supplied as a 2pcs aftermarket set to replace the rear dog bone area on TEAM LOSI MINI-T 2.0 2WD cars. It transfers drive from the gearbox to the rear wheels, matching the original rear dog bone location.

Produced from hardened steel #45, these dog bones increase wear resistance versus softer stamped or alloy parts and help maintain consistent wheel rotation during normal use and light competitive runs. Increasing the shaft diameter from 2.1mm to 2.9mm enhances stiffness and reduces the likelihood of bending or premature wear at the joint.

Fit these as direct rear replacements into the existing CVD/dog bone hubs and verify clearance with the driveshaft housings and wheel hexes. If running aftermarket hubs or spacers, double check fitment and perform a test spin after installation. This item replaces the OEM rear dog bone to offer a stiffer rear drivetrain connection.

Packing includes

  • Dog bone - 2pcs

Original Name / Part No:

LOS212013

 

Product Reviews
1 Reviews
rating
I am very satisfied with their library of parts, I have at least one GPM piece in every RC car I own, wish they could include logo stickers so I can put them on my RC car bodies though. Only thing thats a bother is the shipping times but its not a big dea

Will these work with stock MINI-T 2.0 components?

They are designed to fit stock rear CVD/dog bone hubs, but verify wheel hex and housing clearance after fitting, especially if other aftermarket parts are present.

How much stronger are these than stock dog bones?

With hardened steel #45 construction and a larger 2.9mm shaft, these provide greater stiffness and resistance to bending than typical stock parts.

Any special tools needed to fit them?

No special tools are required beyond common hobby tools to remove and refit the CVD retention clips and wheel hex, plus a quick clearance check and spin test.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved