Master Airscrew GF Series 6x3.5 Propeller MA0635  [MA0635]

GF Series 6x3.5: Key Information

This Master Airscrew MA0635 GF Series 6x3.5 propeller is an RC fixed-pitch prop intended for small electric and foam models where designers seek a compromise between thrust and efficiency. The 6x3.5 label indicates a nominal diameter and pitch useful for motor and airframe selection rather than an absolute performance promise for every installation.

To fit the prop on compatible hubs and adapters, centralise it on the shaft, secure with the correct nut or adapter, and apply the torque recommended by the motor manufacturer for the spinner or prop nut. Perform a rotation and spinner clearance check before powering up the model.

In terms of tuning, the 6x3.5 favours manageable thrust and smoother throttle characteristics compared with higher-pitch choices. Use it in a planned sequence of prop swaps, noting motor RPM, ESC temperature, and handling feedback to determine the optimal configuration for your aircraft.

Carry out pre-flight routine checks such as static balance inspection, close examination of the hub area for cracks, and verification that blades have not been distorted by impacts. Replace the prop if any defect is detected to keep handling predictable and protect drive components.