Master Airscrew MA0860TP Reverse Pusher 3-Blade Propeller 8x6  [MA0860TP]

MASTER AIRSCREW 3-BLADE SERIES 8x6 REVERSE/PUSHER PROPELLER
Price:
£5.48
Brand:
Master Airscrew
Model:
MA0860TP
Condition:
Brand New
Write a review

3-Blade 8x6 Pusher/Reverse Prop

This 3-blade 8x6 reverse/pusher propeller is specified for models that require rear-facing thrust and compact mounting. The three-blade form helps centralise thrust and offers an effective option for builders refining balance and static thrust.

Confirm hub and shaft compatibility before fitting, noting shaft diameter, adapter options, and prop-nut type. Check rotation and mounting direction to ensure the prop delivers reverse thrust as intended rather than acting as a forward-facing unit.

Balance the prop on a balancer or by hand prior to installation. Small balance corrections combined with the right prop-nut torque will reduce vibration that can affect the ESC, motor and bearings. Observe safety procedures and keep clear of the prop arc during static tests.

Use this propeller as a tuning tool within a systematic approach to thrust testing and trim adjustments, rather than as a promise of specific performance gains.

What should I check for shaft compatibility?

Measure the shaft diameter and inspect the hub bore. Choose an adapter or prop-nut that matches the shaft and centres the prop to prevent wobble and vibration.

How do I confirm mounting orientation is correct?

Fit the prop and rotate the motor slowly by hand to verify blade angle and direction produce rearward thrust. A quick low-throttle spin test while clear of the arc will show if orientation is correct.

Are there safety checks before static thrust testing?

Ensure the prop is balanced, the prop nut is secure, and all bystanders are clear. Use protective eyewear and perform initial checks at low throttle to confirm there is no excessive vibration.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved