Mini Spyder Compatible Countersunk Allen Screw M2x16 - Serpent 110256  [SER110256]

Serpent SER110256 Screw allen countersunk m2x16
Price:
£4.45
Brand:
Serpent
Model:
SER110256
Condition:
Brand New
Write a review

Allen countersunk screw for flush chassis mounting

This M2x16 allen countersunk screw is listed as Serpent SER110256 and is intended as a replacement fastener for the Mini Spyder Monster truck RTR EP (SER440001) chassis. The countersunk head allows the screw to sit flush with panels and suspension mounts, minimising interference with moving parts.

Replace worn or missing fasteners with this part during routine servicing or after light impacts. The allen drive and countersunk head are commonly used for chassis attachment points where a neat, low-profile fit is needed.

Fitting notes: insert the screw into the countersunk recess until the head is level with the surface, tighten carefully to avoid cross-threading or stripping, and inspect mating threads prior to reuse. When repairing or tuning, swap in screws of the same length to keep clearances consistent.

Should I use threadlocker with SER110256?

Threadlocker is optional depending on the application; for high-vibration areas you may choose a mild threadlocker, but verify compatibility with the Serpent SER110256 screw and mating material first.

Is it safe to reuse this screw after removal?

Reusing is acceptable if threads and the countersunk face are undamaged and the screw seats flush. Replace any screws that show deformation or thread wear to ensure secure fastening.

Will replacing these screws change ride height or clearance?

Using the same M2x16 length Serpent SER110256 screws will maintain existing stack heights and clearances; substituting longer or shorter screws can affect ride height and component spacing.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved