MINI-Z 4X4 Jimny 38mm Adjustable Damper MZJ338 by GPM  [MZJ338]

6061-T6 38mm damper for MINI-Z 4X4 Jimny

The MZJ338 is a 38mm damper manufactured from 6061-T6 aluminium for KYOSHO 1/18 MINI-Z 4X4 scale vehicles. It is suitable for front or rear damper locations on MINI-Z 4X4 Suzuki Jimny variants to control suspension movement and enhance vehicle balance in dynamic conditions.

The shock is tuned using the top spring retainer to adjust spring preload and change overall damper feel. Supplied is a silver spring that shares the original MINI-Z wire diameter plus a black spring for replacement or alternate tuning. Preload changes shift effective spring hardness without modifying suspension geometry.

Fitting follows common MINI-Z procedures: remove the original unit, fit the ball ends and mounting hardware to the same positions, then set preload at the top retainer. This is an aftermarket hop-up intended for hobby use only.

Select the MZJ338 when a durable, adjustable metal damper is needed for MINI-Z 4X4 Jimny builds where consistent spring dimensions and easy preload control help tune handling.