Mini-Z AWD 18p Machined Alloy Rims 0mm Offset 8.5mm MZA803F/R/0 compatible with KYOSHO by GPM  [MZA803F/R/0]

Mini-z AWD Alloy Front/Rear Sinkage Rims (18p, 0mm Off set , Width 8.5mm) - 1pr - GPM MZA803F/R/0
Price:
£4.32
Brand:
GPM
Model:
MZA803F/R/0
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Machined Alloy Sinkage Rims for Mini-Z AWD

This machined alloy front and rear sinkage rim set is specified for Mini-Z AWD use and is identified by model MZA803F/R/0. The title notes the 18p mounting pattern, neutral 0mm offset and an 8.5mm wheel width.

These rims provide a metal-wheel finish and allow you to refine tyre placement on Mini-Z AWD cars. The 0mm offset together with 8.5mm width affects how tyres sit inside the arch and can influence handling feel at scale when matched with appropriate wheel hexes and tyres.

Fitting advice: intended for Mini-Z AWD wheel assemblies—verify wheel hex size and tyre inner diameter match the 18p mount and 8.5mm width, and confirm body clearance to avoid tyre rub at full lock.

Are these rims compatible with all Mini-Z AWD hexes?

They are made for 18p pattern Mini-Z AWD wheel assemblies; confirm your hex size and mounting style before purchase to ensure compatibility.

Do these rims require specific tyres?

No special tyres are required, but the tyre inner diameter must match the rim and the 8.5mm width should suit the tyre profile to avoid deformation or rubbing.

How should I check for body clearance?

Mount the rims with tyres fitted and turn the steering to full lock while observing the wheel arch; adjust ride height or tyre profile if you notice contact.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved