Mini-Z AWD Precision Rear BBS Alloy Rims 11mm MZA009RW/0 by GPM  [MZA009RW/0]

Precision rear BBS alloy rims for Mini-Z AWD

This aluminium rear wheel set is an RC upgrade for Mini-Z AWD MR-03 models designed to adjust rear track and handling response. The wheels are identified by model reference MZA009RW/0 for parts lists and compatibility checks.

From the name we understand these are BBS-style alloy rear rims with a wide sinkage profile, 0mm offset and an 11mm rim width. On Mini-Z AWD cars a wider rear rim alters tyre seating and the rear contact patch, affecting traction on acceleration and balance through turns. Use these rims to refine rear grip for technical indoor layouts and tuning sessions.

Fitting notes: confirm hex compatibility and clearances on your MR-03 AWD before final fitment, use the correct hex driver for wheel nuts, and check steering and rotor clearance after installation. Balance tyres and inspect seating as part of pre-run checks, and add minimal spacers if offset or body clearance needs correction.

Care and tuning guidance: aluminium rims are long lasting but inspect tyre seating edges for wear after tyre changes. Clean the mating surfaces, remove burrs, and combine these rear rims with suitable tyre compounds and front wheel choices to achieve the handling target without undue strain on the AWD driveline.