Mini-Z Overland Scale Alloy Wheels MOL0308K by GPM  [MOL0308K]

Aluminium alloy wheels for Mini-Z Overland

The MOL0308K alloy rim is an aftermarket replacement tailored for Kyosho Mini-Z Overland models and intended as a scale accessory part. Confirm that the style and dimensions suit your Mini-Z Overland before fitting.

These rims are supplied as a pair and are marked with the 8h designation; inspect hub fitment and tyre seating visually before final installation. Follow standard Mini-Z Overland wheel removal and refit procedures.

Fitting notes: remove the stock wheel, inspect hub faces and any spacers, fit the alloy rim and secure using the vehicle's existing fasteners. Tighten in small increments with a suitable hex driver and verify axial and radial runout after fitting. Avoid over-tightening to prevent damage to wheel hexes or hub parts.

Setup advice: replacing plastic wheels with alloy changes rotating mass and stiffness, which can influence steering feedback and suspension response on the Mini-Z Overland chassis. Ensure wheel balance and clearance are checked and adjust trim as needed after the swap.