Mini-Z Rear Rim 5-Spoke Two-Tone +2.0 Offset MR02-RP20/LB by 3Racing  [MR02-RP20/LB]

Precision aluminium rear rim for Kyosho Mini-Z

The MR02-RP20/LB aluminium rear rim is intended for the Kyosho Mini-Z platforms referenced in the title. It functions as an aftermarket replacement for stock plastic or alloy wheels to alter tyre contact geometry and the model's look without changing drivetrain components.

With a five-spoke two-tone finish and a +2.0mm offset, the rim moves the tyre mounting face outward from the hub. On compatible Mini-Z MR-02 (MM/RM) and MR-015 vehicles this will affect rear stance and scrub. Since only offset and spoke style are listed, confirm hub bore and tyre clearance on your chassis before fitting.

Fitment guidance: remove the original rear rim following Mini-Z procedures, check hub bore and wheel hex seating for a firm fit, and use the original hex screw or wheel nut if appropriate. After installation, inspect for wheel runout and correct tyre seating at low speed to ensure no rubbing with the bodywork or suspension.

Setup advice: a +2.0mm rear offset is often selected to broaden the rear track slightly, changing lateral grip balance and rear behaviour. Combine wheel choice with tyre compounds and shock or differential adjustments to get consistent handling rather than relying on a single change.