Mr. Hobby GSI-B519 - Mr. Surface 1000 Model Primer  [GSI-B519]

Mr.Hobby GSI-B519 - Mr. Surface 1000
Price:
£5.62
Brand:
Mr.Hobby
Model:
GSI-B519
Condition:
Brand New
Write a review

Smooth Primer for Scale RC Projects

The Mr.Hobby GSI-B519, commonly called Mr. Surface 1000, is formulated to give model makers a consistent primer layer for painting. It reduces surface irregularities and helps topcoats adhere more reliably.

Why Modellers Use This Primer

Mr. Surface 1000 offers strong adhesion to common modelling materials and its fine finish helps fill small defects. That makes it a practical choice when preparing shells, panels and small parts for painting.

Best Practice for Application

Spray in a well ventilated area, shake the can thoroughly and maintain about 20-30 cm between the nozzle and the work. Use multiple light coats, allow drying time, and perform gentle sanding where needed to create a flawless base for final paint.

Is this primer compatible with hobby lacquers and acrylics?

Yes, once cured and sanded, the primer provides a suitable base for most hobby lacquers and acrylic topcoats. Always test with your chosen paint on a scrap piece first.

How should I prepare a part before priming?

Clean thoroughly to remove oils and dust, then lightly abrade the surface with fine sandpaper to promote adhesion. Ensure the part is dry and free of contaminants before spraying.

Can I paint over the primer the same day?

It depends on conditions, but waiting at least an hour after the last light coat is a safe rule before sanding or applying topcoat. Cooler or humid environments may require longer cure times.

How do I avoid dust in the primed finish?

Spray in a clean, low-dust area and allow ample flash time between coats. If dust settles, sand the affected area smooth and reapply a light coat.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved