Mr.Hobby GSI-C2 Gloss Black Paint 10ml - Scale Model Lacquer  [GSI-C2]

Mr.Hobby GSI-C2 - Gloss - Black - 10ml
Price:
£2.55
Brand:
Mr.Hobby
Model:
GSI-C2
Condition:
Brand New
Write a review

Mr.Hobby GSI-C2 Gloss Black Paint 10ml for refined scale finishing

The Mr.Hobby GSI-C2 Gloss Black comes in a compact 10ml lacquer bottle and is aimed at modellers seeking a deep, reflective black. It brings out contrast and definition on kit parts, figures and display pieces.

Perfect for Detail and Surface Depth

Mr.Hobby GSI-C2 uses a lacquer base to provide a smooth, resistant gloss that is compatible with primed plastic and many modelling surfaces. It gives dependable coverage for both small details and broader panels.

Best Practice for Application

Layer the paint thinly and allow sufficient drying time between coats to prevent runs and achieve an even sheen. For airbrushing, thin carefully and adjust pressure to match the nozzle and paint viscosity.

Can I use this under clear coats?

Yes, once fully cured the lacquer provides a stable base for clear coats; ensure each layer is cured and clean before applying a protective topcoat to avoid trapping solvents.

Is thinning required for brush painting?

For most brushes you can use the paint as supplied for touch-ups, but a small amount of lacquer thinner can improve flow for smoother brush strokes when needed.

What ventilation should I use when spraying?

Always spray in a well ventilated area or use a spray booth with extraction; wear a suitable respirator to avoid inhaling lacquer fumes.

How do I repair small paint flaws?

Lightly sand the affected area with very fine paper, clean the surface, then reapply thin coats until the finish matches surrounding areas and polish if required.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved