Mr.Hobby GSI-T108 Mr.Color Leveling Thinner 400ml Pro Grade  [GSI-T108]

Mr.Hobby GSI-T108 - Mr.Color Dilute Solution 400ml Leveling Thinner
Price:
£7.65
Brand:
Mr.Hobby
Model:
GSI-T108
GTIN:
4973028515824
Condition:
Brand New
Write a review

Refined Finishes Using Mr.Hobby GSI-T108

Mr.Hobby GSI-T108 Leveling Thinner helps deliver even, low-mark coats when thinning Mr.Color paints. The 400ml size supports repeated use and aims to make laydown and drying more manageable for model builders.

Enhanced Application for Detailed Painting

Using GSI-T108 improves paint flow so delicate features and panel lines are cleaner after spraying. It is particularly effective for achieving uniform gloss and smooth blends across small surfaces.

Good Fit for Many Modelling Uses

Not specifically made for flexible RC shells, this thinner suits a broad range of static model projects and miniatures. Compatibility with Mr.Color helps maintain hue and finish when used correctly.

Basic Mixing and Preparation Advice

Begin with a 1:1 thinner to paint mix and refine based on nozzle, coat thickness, and environmental conditions. Trial on a spare part first to confirm coverage and colour retention before committing to the main piece.

Will this thinner affect clear coats?

When used appropriately with lacquer clear coats it can improve flow, but always test to ensure the thinner does not alter gloss level or cause wrinkling on sensitive top coats.

Can I store mixed paint and thinner?

Short term storage of mixed paint may be possible in sealed containers, but extended storage can lead to sedimentation or solvent loss. Prepare fresh mixes when practical.

How do I remove clogged airbrush residue?

Flush the airbrush with a dedicated cleaner suitable for lacquer systems, then use a small wire or brush to clear stubborn deposits. Avoid water-only cleaning for lacquer residues.

Is ventilation essential when using this thinner?

Yes, use in a well ventilated area and consider extraction or a respirator for prolonged spraying to reduce inhalation of solvent vapours.

What should I check before painting with Mr.Color and GSI-T108?

Ensure surfaces are clean, degreased and primed where necessary. Test colour and adhesion on a scrap piece before full application to confirm the desired result.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved