Mr.Hobby SF291 Finishing Surfacer 1500 White Panel Primer  [GSI-SF291]

Mr.Hobby SF291 - Finishing Surfacer 1500 White
Price:
£4.57
Brand:
Mr.Hobby
Model:
GSI-SF291
GTIN:
4973028631166
Condition:
Brand New
Write a review
alt="Mr.Hobby SF291 - Finishing Surfacer 1500 White" title="Mr.Hobby SF291 - Finishing Surfacer 1500 White"

Prime and Smooth with Mr.Hobby SF291

Model builders can rely on the Mr.Hobby SF291 Finishing Surfacer 1500 White to produce a consistent primer layer. The formula is aimed at evening out minor blemishes so topcoats apply more predictably.

Key Advantages of Mr.Hobby SF291

The surfacer fills fine scratches and evens out texture differences to give a uniform painting surface. Its white base assists when laying down vivid colours and checking for imperfections.

Tips for Correct Application

Make sure parts are clean and free from release agents prior to spraying Mr.Hobby SF291 Finishing Surfacer. Use thin, overlapping passes, allow full drying between coats and perform light sanding where needed before applying paint.

Is the surfacer compatible with later acrylic or enamel paints?

Yes, once cured and sanded it accepts common model paints, but always test adhesion with your chosen paint type on a scrap piece first.

Should I sand between coats of surfacer?

Light sanding between coats can help level the surface and remove dust nibs. Use fine grit and keep pressure gentle to avoid removing too much material.

Can I spot prime small areas with this product?

Spot priming is possible for small repairs, but feather the edges well and finish with a full light coat for an even appearance across the whole panel.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved