Mugen MBX Drive Shafts spring steel replacement - AM-MBX-E0222 by Arrowmax  [AM-MBX-E0222]

Arrowmax AM-MBX-E0222 F/R Drive Shaft (spring steel) (2)
Price:
£15.80
Brand:
Arrowmax
Model:
AM-MBX-E0222
Condition:
Brand New
Write a review

MBX front/rear shaft pair

The Arrowmax AM-MBX-E0222 is supplied as a matched pair of front and rear drive shafts for Mugen MBX chassis maintenance and setup. Built from spring steel, these shafts offer a tuned balance between torsional response and long term fatigue resistance, making them suitable as direct replacements or aftermarket hop-ups in the MBX driveline.

Fit these shafts where predictable flex and reliable engagement are required, such as when fine-adjusting driveline stiffness for circuit work or replacing parts after frequent running. The pack contains two pcs to cover a single axle position set.

Specifications

  • Item: F/R Drive Shaft (spring steel) - 2 pcs
  • Material: Spring steel
  • Model Number: AM-MBX-E0222
  • Compatibility: Mugen MBX chassis (spares / hop-ups)

Use these spring steel shafts when a like-for-like MBX driveline replacement is needed; always verify spline engagement and bearing condition during installation to preserve drivetrain reliability.

Do these replace OEM MBX shafts directly?

They are designed for the Mugen MBX chassis line and generally fit directly, but you should double check spline count and mounting points on your specific model before fitting.

What is the best way to check shaft alignment?

Install shafts dry first, rotate the driveline to confirm smooth engagement, then check that there is no binding and that bearings run freely before final securing.

When should I swap these out for new ones?

Replace shafts after detecting permanent bends, surface cracks, or if handling becomes unpredictable; timely replacement prevents secondary damage to cups and gears.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved