Performance Carbon Multi-Roller Mini 4WD Stay Plate M4WD-16_SG by 3Racing  [M4WD-16_SG]

Tamiya Mini 4WD Carbon Multi Roller Flat Plate - 3RACING M4WD-16_SG
Price:
£3.70
Brand:
3Racing
Model:
M4WD-16_SG
Condition:
Brand New
Write a review

Performance carbon plate for compact roller arrangements

This aftermarket carbon flat plate is designed for Mini 4WD stays where a low-profile multi-roller installation is needed. The M4WD-16_SG keeps roller groups close to the chassis and presents a slim carbon finish preferred by many tuners.

The plate matches common Mini 4WD front, rear, and side stay mounting patterns and is frequently used when several small rollers are installed in a tight footprint. Check for adequate clearance and correct screw positions when pairing with aluminium or polymer stays.

Workshop advice: confirm spacer heights and screw engagement before final assembly and ensure roller shafts run true to prevent binding. Being a non-mechanical accessory, it carries no electrical or drivetrain specifications.

How do I confirm fitment on my car?

Measure your stay mounting holes and compare to the plate pattern. Although the plate follows common layouts, a quick check prevents surprises during fitting.

What are the limits of thin carbon in racing?

Thin carbon gives a low visual profile and stiffness but can be susceptible to repeated high-impact loads, so consider reinforcement for frequent heavy use.

Should I use washers or backing plates?

Use washers or a backup plate at high-load mounting points to spread clamping forces and protect the carbon from crushing.

Does the plate affect aerodynamics or weight much?

The plate is very light and low-profile, so its impact on weight and aerodynamics is negligible compared with larger stay assemblies.

Recommended maintenance for carbon stays?

Regularly inspect mounting holes and fastener torque, replace worn spacers, and check for hairline damage after impacts to maintain reliability.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved